New Window Installation Cost - Free Measure, Exact Written Quote

How Much Does New Window Installation Cost in Fort Lauderdale?

New window installation in Fort Lauderdale typically costs $550 to $1,850 per window including materials and labor as of 2026. Most homeowners replacing windows throughout a 1,500 to 2,000 square foot home spend between $7,200 and $18,500 for the full project. Impact-rated windows, which most Fort Lauderdale properties require under Florida Building Code, sit at the upper end of that range, while standard builder-grade vinyl windows fall near the bottom.

New Window Installation Cost Breakdown (2026)

Here’s what the numbers look like across the Fort Lauderdale market this year. These ranges reflect actual project costs we see across neighborhoods like Rio Vista, Victoria Park, Imperial Point, and Coral Ridge, not national averages that miss the mark for coastal South Florida.

Two factors move that price more than anything else in Fort Lauderdale. The first is whether the home sits inside a High-Velocity Hurricane Zone (HVHZ). Homes east of US-1 in neighborhoods like Las Olas Isles, Harbor Beach, and parts of Lauderdale Harbours require large-missile impact-rated windows, which cost 20-35% more than the small-missile ratings accepted further west. The second is the condition of the existing opening. Older Fort Lauderdale homes built before 1970 often have rotted wood bucks or out-of-square concrete openings that add $100 to $250 per opening in prep work.

We put the price in writing before anyone picks up a tool. Not a vague range, not a “we’ll see how it goes.” A line-item price for the windows, labor, and any structural work. That’s how we’ve done it at Hale Windows since Spencer Odell founded the company in 2009, and it means the invoice at the end matches the quote you approved at the start.

What Affects New Window Installation Pricing in Fort Lauderdale

Every bid in this market gets shaped by the same handful of factors. Knowing them puts you in a stronger position to compare quotes fairly.

• HVHZ versus non-HVHZ location. The Florida Building Code divides Fort Lauderdale into wind zones. East of US-1, windows must withstand large-missile impact testing (a 9-pound 2×4 fired at 50 feet per second). Those windows use thicker laminated glass and reinforced frames. That single factor can add $250 to $450 per window.
• Frame material. Vinyl runs cheapest, aluminum sits in the middle and handles salt air well, wood costs the most but fits historic district requirements. In neighborhoods like Colee Hammock or Sailboat Bend, the historic board may require wood or wood-clad windows regardless of what the code minimum would allow.
• Glass package. Low-E glass (a thin coating that blocks heat while letting light through) and argon gas fill add roughly $100 to $250 per window. In a Fort Lauderdale summer, that coating meaningfully cuts cooling load, especially on western-facing walls in neighborhoods like Riverside Park or Tarpon River where afternoon sun hits hard.
• Opening condition and stucco work. Homes built before the 1980s often have rotted wood framing around window openings. Replacing a buck or adding new flashing runs $75 to $250 per opening. Stucco patching after the tear-out adds another $50 to $150 per window depending on texture matching.
• Window size and operation type. A standard 3×5 foot single-hung costs less than an 8-foot-wide picture window or a custom arch-top. Casement and awning windows, common on mid-century homes in areas like Coral Ridge Country Club Estates, cost 15-25% more than a slider of equal size because the hardware and hinge work is more involved.
• Permit and inspection fees. Fort Lauderdale requires a window permit with fee schedules based on valuation. Expect $300 to $1,200 in permit costs across a whole-home project, plus third-party engineering if the home falls outside prescriptive structural paths in the code.

What You Get With Each Product Grade

Not every window that costs more is worth it, and not every budget option is a bad call. Here’s the practical difference across the product tiers we install, drawing from the eight professional-grade lines we service: PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux.

Builder-Grade Vinyl ($550 – $900 per window)

These are single- or double-hung windows from the entry lines of manufacturers like PGT’s Series 300 or comparable ECO Window Systems models. They meet current energy code, carry a basic impact rating in non-HVHZ zones if specified, and install fast. What you give up: frame rigidity, corner-weld quality, and long-term sag resistance. On a house you’re selling within three years, they do the job. On a house you intend to live in for fifteen, you’ll feel the difference.

Premium Vinyl and Mid-Grade Aluminum ($750 – $1,400 per window)

This is the sweet spot for most Fort Lauderdale homeowners. PGT’s WinGuard line, CGI’s Sentinel models, and CWS equivalents in this tier give you a stiffer frame, a better glass package, and a cleaner finish. The aluminum options handle salt spray in the corridor between the Intracoastal and the ocean without the corrosion issues vinyl frames can develop at the corners over time. Most of our whole-home replacements in Victoria Park and Poinsettia Heights fall into this range.

High-End Impact Rated ($1,100 – $1,850 per window)

For homes east of US-1 and for anyone who wants the strongest possible opening protection, this tier is where ES Windows and top-line PGT and CGI models live. Large-missile rated, argon-filled, low-E laminated glass, and mechanical fastening schedules that meet the strictest pressure-rating tests in the building code. The cost is real, but so is the difference when a Category 4 storm runs through.

How to Save on New Window Installation in Fort Lauderdale

The smartest way to control cost is to replace windows in phases rather than all at once, and to prioritize the openings that matter most: windows facing west and south take the most heat load, and windows on the windward face matter most for storm protection. Replacing those first, then doing the rest in year two, keeps a project honest without overextending the budget.

Three other things that save real money:

• Don’t shop brand, shop specification. A PGT window and a CGI window built to the same design pressure rating, glass package, and size perform nearly identically. When you let the installer quote the spec rather than the badge on the frame, you open up competition among the eight product lines we carry, which means the price comes down without the performance dropping.
• Bundle openings where labor overlaps. Two windows on the same wall cost less to install than two windows on opposite corners of the house because the crew isn’t breaking down and setting up twice. Grouping your phase by wall rather than by room saves $50 to $150 per window.
• Replace in the slower season. Fort Lauderdale window demand peaks from March through August as snowbirds finalize renovations. Scheduling a phase between September and February typically saves 5-10%, and manufacturers run deeper promotions during those months.

One thing we recommend against: cutting out the permit. Some installers will offer to skip it to save the fee. That’s a false economy in Fort Lauderdale, where unpermitted window work gets flagged during home sales by insurance inspections and can force a full re-do at total cost. Permits also create the inspection record that matters for wind-mitigation insurance credits.

Call (754) 354-3671 and we’ll walk through your home’s specific situation, give you a written price for any phase, and leave the decision with you. The estimate is free.

FAQs – New Window Installation Cost

How much does it cost to install one window in Fort Lauderdale?

A single standard vinyl window runs $550 to $900 installed, while a premium impact-rated aluminum window for an HVHZ zone east of US-1 costs $1,100 to $1,850. Single-window jobs carry a higher per-unit cost because mobilization and setup time don’t amortize across multiple openings. Call (754) 354-3671 with your window size and location for an exact written price.

Is it cheaper to replace all windows at once?

Yes, almost always. Per-window cost drops 10-20% on whole-home projects because the crew is already set up, materials ship in one delivery, and the permit covers all openings under a single valuation. A 12-window replacement ranges from $7,200 to $18,500 depending on product grade. We’ll give you phased pricing if you’d rather spread the work over two years.

Do I need impact windows in Fort Lauderdale?

Yes, in most of the city. Florida Building Code requires impact-rated windows or shutters for new installation and replacement anywhere in Broward County. East of US-1, the requirement upgrades to large-missile impact standards, which add $250 to $450 per window over small-missile ratings. We’ll confirm which wind zone applies to your street before quoting.

What does window installation labor cost in Fort Lauderdale?

Labor alone typically runs $150 to $450 per window, with the higher end for stucco repairs, rotted buck replacement, and third-floor or awkward-access installs common in older Fort Lauderdale homes. Materials make up the rest. Our written quotes split labor and materials line by line so you can see exactly where the money goes.

Can you install new windows the same week?

Usually, yes. Standard in-stock sizes from PGT and CGI can often be installed within 5 to 7 business days of the signed quote. Custom sizes and high-demand impact lines run 4 to 8 weeks from order to install. Call (754) 354-3671 and we’ll check current lead times for the exact product you need.

Do you offer free estimates for window installation?

Yes. Every estimate is free, in-home, and delivered as a written price before any work starts. The same New Window Installation in Fort Lauderdale team that handles the estimate handles the install, and every job carries our 365-Day Done Right Promise: if it’s not right, we make it right, no argument needed.

Who Comes to Your Home for the Estimate

Opening the door to a stranger is a genuine concern for many Fort Lauderdale homeowners, and it’s one we take seriously. Every technician Hale Windows sends operates under what we call the Threshold Standard: background-checked, identity-verified, uniformed, photo-badged, and pre-announced by name and photo before the visit. You’ll know who’s coming, what they look like, and when they’ll arrive before you open the door.

Spencer Odell founded Hale Windows in 2009 as part of the Threshold Group family of home-service brands, and that standard has been non-negotiable from day one. When someone shows up to measure your windows, you’ll already have their name and face on your phone.

Why We Put the Price in Writing Before Any Work Begins

Window pricing in Fort Lauderdale has too many moving parts for a verbal estimate to mean anything. The wind zone, the existing opening condition, the product availability, the permit schedule, all of it. So we don’t do verbal estimates. Every Hale Windows job, from a single window in home improvement projects of any scope to a full 18-opening replacement, gets a written price delivered before work starts. If the scope changes during install because we find something behind the stucco, that change gets written down and approved too. The invoice won’t surprise you.

That policy applies to repair work as well. Every window repair carries a written guarantee, and if that repair fails within the guarantee period, the second visit is free. The 365-Day Done Right Promise sits behind all of it: if it is not done right, Hale makes it right.

Call (754) 354-3671 for a free, written estimate on your new window installation. A live person answers, 24 hours a day, 7 days a week. No voicemail, no callback queue, no pushy sales routine. Just straight answers and a price you can hold us to.

Pricing reflects the Fort Lauderdale market as of 2026. Hale Windows Fort Lauderdale offers free estimates – call (754) 354-3671.

Written by Spencer Odell, Owner at Hale Windows Fort Lauderdale, serving Fort Lauderdale since 2009.