New windows and doors improve comfort, cut energy bills and add long-term value to your home. Hale Windows Fort Lauderdale pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Mr-Glass Windows & Doors in Pompano Beach, FL | Hale Windows Fort Lauderdale
We service Mr-Glass windows and doors across Pompano Beach, independently of the manufacturer, and we see the same thing on nearly every call: salt. The city’s proximity to the Atlantic means aluminum frames corrode faster here than almost anywhere else in Broward County, and Mr-Glass hardware takes the brunt of it. Our techs know which Mr-Glass components fail first in this environment and which repairs will actually hold. Call (754) 354-3671 to schedule our Window Repair in Pompano Beach or get a written estimate.
Why Pompano Beach Residents Choose Us for Mr-Glass Service
Most window companies in South Florida will claim they can work on any brand. We’d rather be specific. Our crew has spent years servicing Mr-Glass windows and doors in Pompano Beach specifically – the 7500 and 7600 series single and double hungs, the 8200 horizontal rollers, the 5900 impact sliders. Spencer Odell, who runs Hale Windows Fort Lauderdale, learned his trade at Los Angeles Trade-Technical College and has spent the better part of two decades measuring, installing, and warranting windows and doors across Broward County. His standard is simple: “If I wouldn’t put it on my own house, I won’t sell it to yours.”
That means we stock OEM Mr-Glass locks, rollers, and impact-rated components locally, so Pompano Beach service calls don’t wait on parts shipped from a warehouse in another state. We also give every customer a written price before any work starts. No surprises on the invoice, ever. And every repair carries a written guarantee – if it fails, the second visit is free. That’s the 365-Day Done Right Promise, and it applies to every Mr-Glass job we take in this city. Read about our broader Mr-Glass sales & service expertise, which includes the full line we handle across South Florida.
Common Mr-Glass Windows & Doors Problems We Solve in Pompano Beach
- Corroded aluminum frames on 7500 and 7600 series. Salt-laden air attacks the corners and weep holes first. We regularly see stuck sashes and air leaks on these units in Pompano Beach within 10 to 15 years of install – faster on barrier island properties.
- Seized rollers on Mr-Glass 8200 horizontal sliders. Sand and humidity destroy the original nylon rollers quickly. Panels start to scrape, then bind, then refuse to move at all. This is the single most common Mr-Glass repair we perform in Pompano Beach.
- Worn weatherstripping along the interlock on 5900 impact sliding doors. Wind-driven rain from tropical storms finds the gaps and pushes water inside. You’ll notice it first as damp carpet or tile near the track after a heavy squall.
- UV-degraded glazing bead on Mr-Glass picture windows. Coastal sun fades and cracks the factory bead, loosening the glass and killing the thermal seal. Condensation between panes is the telltale sign.
- Fogged or failed impact glass units. Once the seal goes on an impact-rated Mr-Glass window in this climate, replacement is usually the right call. We’ll tell you honestly if a repair is throwing good money after bad.
Mr-Glass Service in Pompano Beach: What Local Conditions Mean for Your Equipment
Here’s something that won’t show up on a generic Mr-Glass service page. Many condo associations along the Intracoastal in Pompano Beach – buildings from the 1960s through the 1980s, mostly low-rise – now require stainless steel or specially coated hardware on window hinges and frames as a condition of passing inspection. This rule exists because salt corrosion in these buildings is so aggressive that standard aluminum hardware literally crumbles within a few years. A few miles inland in Coconut Creek or Margate, nobody enforces anything like it. If you own a Mr-Glass unit in a Pompano Beach condo and you’re due for board approval on window work, you may need to upgrade hardware that would pass inspection anywhere else. We know which associations are strict about this, and we quote hardware accordingly. At Terra Mar Island, our crew serviced a Mr-Glass 8200 horizontal roller where the original aluminum rollers had seized from salt and sand, making the panel nearly impossible to open. We replaced the rollers with a sealed stainless-steel aftermarket set and realigned the track, restoring smooth operation that has held through two hurricane seasons.
Mr-Glass Models & Products We Service in Pompano Beach
We work on the full residential Mr-Glass line most common in Pompano Beach housing stock: the 7500 Series Single Hung, 7600 Series Double Hung, 8200 Horizontal Roller, and 5900 Impact Sliding Door. When a part is structural – locks, rollers, impact-rated components – we use OEM Mr-Glass hardware. For weatherstripping and sealants, we install aftermarket materials that match or exceed original specs for coastal durability. The distinction matters: an OEM roller on an 8200 will wear out just as fast as the original did in this sand and humidity. We’d rather put in a sealed stainless set that survives the environment. For our full service footprint, see the Pompano Beach service area page.
Mr-Glass Service Pricing in Pompano Beach
Here’s what you’re looking at, roughly, for common Mr-Glass repairs in this area:
- Roller replacement on an 8200 horizontal slider: $180 to $340 per panel, depending on track condition and whether stainless hardware is required.
- Weatherstripping replacement on a 5900 impact slider: $220 to $450, including the interlock and sill sections.
- Glazing bead replacement and re-seal on a picture window: $150 to $300 per unit.
- Full frame replacement for a corroded 7500/7600 single or double hung: $850 to $1,600 installed, impact-rated, depending on size and opening.
What drives the price in Pompano Beach specifically is salt damage. A window that looks fine from ten feet away may have hidden frame corrosion that doubles the labor once we’re in the opening. That’s exactly why we give a written line-item estimate before work begins – you see every dollar before you approve anything. Call (754) 354-3671 to schedule a free estimate and we’ll tell you what your specific Mr-Glass windows actually need.
Serving Pompano Beach, FL - Our Local Coverage Area
We’re based in the Pompano Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – Mr-Glass Windows & Doors in Pompano Beach
It depends on the building. Many associations along the Intracoastal and barrier island in Pompano Beach now require stainless steel or coated hardware on window hinges and frames. We know which buildings enforce this and we quote the right hardware from the start. Call (754) 354-3671 and tell us your building name – we’ll let you know what’s needed.
Sand and humidity. The original nylon rollers on Mr-Glass 8200 series sliders degrade quickly in this climate, and once the bearings go, the panel scrapes and binds. We replace them with sealed stainless-steel aftermarket rollers that hold up far better near the coast. The fix is straightforward and usually done in a single visit.
Generally no. Impact standards have tightened significantly since the 1980s, and original Mr-Glass impact units from that era typically fall short of current HVHZ requirements. If your Pompano Beach building has original impact glazing from the ’80s, Window Replacement in Pompano Beach is usually required when the unit fails or when the opening is modified. We’ll tell you honestly if your existing glass can stay or if code demands new.
Look at the corners and weep holes. If you see white powdery oxidation, flaking metal, or visible pitting, the frame is compromised. Once corrosion eats through the aluminum on a 7500 or 7600 series, repair is a temporary fix at best. We’ll inspect and give you a straight answer – if the frame is sound, we repair. If not, we say so and quote replacement. Estimates are free at (754) 354-3671.
Yes, roughly twice as often. Constant salt spray and UV exposure break down weatherstripping on all window brands faster along the coast, and Mr-Glass is no exception. We recommend checking the interlock and sills on your 5900 impact slider every 18 to 24 months. Replacement costs between $220 and $450, which is a lot cheaper than repairing water damage after a storm sneaks through.
No. The written estimate we give you before work begins is the price you pay. If we find hidden damage during the job, we stop, show you what we found, and give you a revised quote before touching anything else. You approve it or you don’t – the choice is always yours. Call (754) 354-3671 for a free, written estimate on your Mr-Glass repair.
Key Takeaways
- We are an independent Mr-Glass service provider – not manufacturer-affiliated or authorized – serving Pompano Beach specifically.
- Salt corrosion is the number-one killer of Mr-Glass frames and hardware in this city, and we quote repairs accordingly.
- Condo associations along the Intracoastal in Pompano Beach often require stainless steel or coated hardware that inland buildings never ask for.
- Every repair carries a written guarantee, a written price before work starts, and the 365-Day Done Right Promise.
Service Areas Near Pompano Beach
We provide Mr-Glass service throughout Pompano Beach and the surrounding communities, including Fort Lauderdale, Plantation, Lauderhill, Lauderdale Lakes, and Pembroke Park. For homeowners specific to those areas, see our Mr-Glass service in Plantation and Mr-Glass service in Fort Lauderdale pages.
Book Your Mr-Glass Service in Pompano Beach Today
If your Mr-Glass windows or doors are sticking, leaking, or showing salt damage, don’t wait for the next storm to find the gap. Call (754) 354-3671 to schedule your free estimate. We’ll send a background-checked, photo-badged technician to your Pompano Beach home with your name and photo in hand before they ever ring the bell.
Written by Spencer Odell, Owner at Hale Windows Fort Lauderdale, serving Pompano Beach since 2009.
Six Reasons Homeowners Choose Hale Windows Fort Lauderdale
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.