Mr-Glass Front Door Replacement Nationwide

Mr-Glass Front Door Replacement in Fort Lauderdale: What to Know First

Mr-Glass front door replacement in Fort Lauderdale typically runs $1,800 to $4,600 for a full slab-and-frame job, depending on the glass configuration and whether the existing rough opening needs correction. Most replacements we handle take one day on-site, with parts ordered 5 to 10 business days ahead. We’re an independent Mr-Glass service provider, not a manufacturer-authorized dealer, which means we choose parts based on what actually holds up in South Florida heat and salt air, not what the factory prefers to sell you. If you own a Mr-Glass entry door in Fort Lauderdale and it’s sagging, fogged, or binding, call (754) 354-3671 and we’ll give you a written price before any work starts.

Call (754) 354-3671

This page is for Fort Lauderdale homeowners with a Mr-Glass door who need straight answers: what fails, what it costs, and who to trust with the job. Spencer Odell and the crew at Hale Windows Fort Lauderdale have been measuring and installing doors across Broward County for the better part of two decades, and we’ve replaced enough Mr-Glass units to know exactly where they wear out first.

How Mr-Glass Products Fail, and How We Fix Them

Mr-Glass doors are common in Fort Lauderdale condos and single-family homes built from the late 1990s through the 2010s. They’re solid mid-range doors, but every product line has its weak spots. Here’s what we see most often, by series, and what we do about it:

• Mr-Glass Contemporary series, roller track wear. These doors run on bottom-mounted rollers that collect sand and shell grit from driveways and walkways. After a few Fort Lauderdale wet seasons, the bearings seize and the door drags or jumps the track. We replace the rollers with sealed stainless-bearing units, not the OEM plastic ones, which last three to five times longer in coastal air.
• Mr-Glass French entry units, center seam deflection. Double-door Mr-Glass fronts often sag at the center meeting stile because the factory hinge screws are undersized for the weight of dual insulated glass panels. When the seam opens at the top corner, the door loses its seal and the deadbolt binds. We pull the slab, reset the reveal with a 3-inch screw into the framing, and re-hang with the proper top-to-bottom gap. No caulk-over shortcut, which we see from other shops far too often.
• Mr-Glass obscured glass doors, IG seal failure. The insulated glass units in Mr-Glass entry doors with decorative or rain-pattern glass start fogging between the panes around year 12 to 15 in Fort Lauderdale’s humidity, faster if the door gets full afternoon sun with no overhang. Once the desiccant inside the spacer is saturated, the glass is done. We order replacement IGUs sized to the manufacturer’s exact daylight opening so the panel sits flush with the original stops.
• Mr-Glass fiberglass slab, stile delamination. On fiberglass Mr-Glass doors, the molded stiles can delaminate from the foam core after years of thermal cycling and direct sun on west-facing entries in neighborhoods like Rio Vista or Coral Ridge. We check the slab with a moisture meter and, where delamination is caught early, we re-bond and clamp. Where it’s too far gone, we replace the slab and re-use the frame if the square is still true.
• Mr-Glass threshold, corrosion at the cap. The aluminum thresholds under Mr-Glass entry doors corrode at the screw line where salt air and irrigation overspray sit. That stops the sweep from sealing and lets in the afternoon downpour. We swap the threshold for a mill-finish aluminum version with the same rise height and re-cut the sweep to match, so the door closes clean and the water stays outside where it belongs in Fort Lauderdale.

Our Mr-Glass Front Door Replacement Process

Here’s what happens when you call us about a Mr-Glass front door in Fort Lauderdale:

1. 1
   Call and talk to a person. No voicemail, no callback queue. A live person answers 24/7 and schedules your inspection.
2. 2
   One of our techs arrives, pre-announced. You’ll get the technician’s name and photo before the truck pulls up. Every tech is background-checked, identity-verified, and photo-badged under our Threshold Standard.
3. 3
   We measure and diagnose. We check the rough opening, the square of the existing frame, the condition of the threshold, and the glass. If the framing is sound, we quote a slab replacement. If the rough opening has shifted, we quote the correction with it, in writing.
4. 4
   We give you a written price before any work starts. Parts are ordered after you approve the number. For Mr-Glass doors, we decide between OEM and quality aftermarket case by case, and we tell you which and why before we order.
5. 5
   We install, test, and clean up. On install day, we remove the old slab, set the new one, adjust the strike and sweep, and run the door through 10 full open-close cycles to confirm the reveal stays even. We haul away the old door and leave the entry swept.
6. 6
   You get the 365-Day Done Right Promise. If the work is not right, we make it right. No argument needed.

What Mr-Glass Front Door Replacement Costs in Fort Lauderdale

Here are honest ranges based on recent Mr-Glass jobs we’ve completed in Fort Lauderdale:

• Slab-only replacement, fiberglass, no glass: $1,800 to $2,600
• Full door with insulated glass unit, single panel: $2,400 to $3,800
• Double French entry with two IGUs: $3,200 to $4,600
• Rough opening correction (shim, re-square, re-flash): $400 to $800, added only when needed

What moves the price: glass size and pattern, whether the frame gets re-used or replaced, and whether the existing weatherproofing at the sill pan is still doing its job. We give you the written number before we order parts, and that number does not change once work starts. Call (754) 354-3671 for a free estimate on your Mr-Glass front door.

Why Fort Lauderdale Homeowners Call Hale Windows Fort Lauderdale for Mr-Glass Work

We’re a windows-and-doors specialist, not a general contractor who happens to hang a door between kitchen remodels. Our techs know Mr-Glass failure patterns because we’ve been pulling these doors apart across Fort Lauderdale for years, from Coleman Park townhouses to waterfront condos on Las Olas. But we also install and service PGT, CGI, CWS, and ES Windows, which means if your Mr-Glass door turns out to be beyond saving, we can show you an impact-rated alternative that meets Florida Building Code and still matches your entry’s proportions. Every job carries the 365-Day Done Right Promise and a written price in your hands before we touch a tool. If I wouldn’t put it on my own house, I won’t sell it to yours.

FAQs