New windows and doors improve comfort, cut energy bills and add long-term value to your home. Hale Windows Fort Lauderdale pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Awning & Hopper Windows in Fort Lauderdale, FL
Awning windows hinge at the top and open outward from the bottom, while hopper windows hinge at the bottom and open inward from the top. Both are compact, practical choices for South Florida homes where ventilation matters but wall space is limited. At Hale Windows Fort Lauderdale, we install and service awning and hopper windows from professional-grade lines like PGT and CGI, and every job starts with a written price in your hands before any work begins. Call us at (754) 354-3671 for a free estimate, or keep reading to learn what these windows cost and whether they fit your home.
If you’re weighing your options across window styles, our Window Installation in Fort Lauderdale page walks through the full range of what we install and what to expect from the process.
When You Need Awning & Hopper Windows
Awning and hopper windows solve specific problems that other window styles handle poorly. Here are the situations where we most often recommend them in Fort Lauderdale:
- You want ventilation during afternoon rainstorms. Awning windows open outward and create a natural awning effect, so you can leave them cracked open during a light rain without water pouring onto the sill. In neighborhoods like Victoria Park and Rio Vista, where summer downpours roll through nearly every afternoon, this matters more than people expect.
- Your bathroom or laundry room needs airflow but no one wants a sliding window. Small hopper windows fit above eye level and pull in fresh air without sacrificing privacy. We install these regularly in older Coral Ridge and Middle River Terrace homes where original jalousie windows have finally worn out.
- You have a tight wall space that a standard single-hung won’t fit. Awning and hopper windows come in smaller, squatter dimensions than most double-hung or casement units, making them workable above kitchen counters, in stairwells, and on narrow side walls.
- Your existing crank-out windows are stuck, corroded, or leaking. Salt air and humidity are hard on hardware. We replace failed awning and hopper units throughout Fort Lauderdale, and the old ones are rarely worth repairing when the frame has started to rot or the crank mechanism has seized.
- You’re replacing a jalousie window and want something that actually seals. Jalousie windows, the louvered glass slats common in mid-century Florida homes, leak air and water by design. An awning window fits a similar opening size but actually closes tight against the frame.
- You need a window that locks more securely than a sliding panel. Both awning and hopper windows use a crank or lever mechanism, and when closed, the sash presses firmly against the weatherstripping. That’s a tighter seal than most sliding windows achieve after a few years of Florida humidity.
If you’re not sure whether an awning or hopper window is right for a particular opening, we’ll tell you straight during the estimate. We’re not going to sell you a window style that fights against your wall dimensions or your ventilation needs.
Our Awning & Hopper Windows Process
Replacing a window in Fort Lauderdale means working around heat, rain, and the structural realities of older concrete-block homes. Here’s how it goes with us:
- You call, a live person answers. There’s no voicemail queue at Hale. We answer 24 hours a day, 7 days a week. You’ll describe the window or windows you’re dealing with, and we’ll schedule a time that works for you.
- You get the name and photo of your technician before they arrive. This is our Threshold Standard. Every technician we send is background-checked, identity-verified, uniformed, photo-badged, and pre-announced by name and photo before the visit. You’ll know exactly who is pulling up to your house before you open the door.
- We measure, inspect, and talk through options. The technician examines the existing opening, checks the surrounding frame for water damage, and discusses what you want the window to do. We’ll show you product options from manufacturers like PGT, CGI, and ES Windows, and explain the tradeoffs honestly.
- You receive a written price before any work is scheduled. No verbal ballparks that change later. The number we put on paper is the number you pay. This includes the window, hardware, installation, and haul-away of the old unit.
- Installation day. Our crew removes the old window, preps the opening, installs and flashes the new unit, and seals everything against South Florida rain. Most awning and hopper window replacements are done the same day.
- We walk through the finished work with you. You’ll see how the crank or lever operates, how the locking mechanism works, and what the warranty covers. If anything isn’t right, it’s covered under our 365-Day Done Right Promise: if the work isn’t done right, we make it right, no argument needed.
Awning & Hopper Windows Pricing in Fort Lauderdale
Awning window replacement in Fort Lauderdale typically runs $420 to $850 per window installed, depending on size, frame material, glass package, and whether the existing frame needs repair work. Hopper windows generally come in lower because they’re smaller; expect $300 to $600 per unit installed.
Here’s what those ranges look like for a typical single window:
- Small hopper window (2′ x 2′ or similar): $300 to $450 installed. Vinyl frame, single pane or basic insulated glass.
- Standard awning window (3′ x 2′ to 3′ x 3′): $420 to $650 installed. Aluminum or vinyl frame, insulated glass.
- Large awning window with impact glass: $650 to $850 installed. PGT or CGI impact-rated unit with insulated laminate glass.
- Frame repair or replacement work: $100 to $350 additional, depending on how far the water damage extends into the opening.
Several things move the price in Fort Lauderdale specifically. If you’re in a coastal flood zone or east of US-1 in neighborhoods like Harbor Beach or Las Olas Isles, building code requires impact-rated glass, which adds $150 to $350 per window compared to standard insulated glass. Homes built before the 1990s often have non-standard rough openings, which can mean custom sizing charges. And if the original window was installed without proper flashing, we may need to open up the surrounding area to address moisture intrusion before we install the new unit.
The best way to get an exact number is to have us look at the actual opening. Estimates are free, and the price we quote is in writing before you commit to anything. Call (754) 354-3671 to schedule yours.
Why Awning & Hopper Windows Work Well in South Florida
Fort Lauderdale’s climate punishes windows in ways that temperate regions never see. Awning and hopper windows handle it better than most styles for a few reasons:
Rain protection. The top-hinged design of an awning window means the sash itself acts as a small roof when open. During the 3 p.m. summer downpours we get from May through October, you can keep an awning window open a few inches and get airflow without rain driving onto your interior sill. This is why you see them so often in older Florida kitchens and bathrooms, and why they remain a smart choice for new work.
Tight sealing against humidity. When an awning or hopper window closes, the sash pulls inward against the frame gasket rather than sliding along a track. That compression seal handles the high-humidity conditions in Fort Lauderdale better than sliding windows, which rely on brushes and tracks that wear down after years of use.
Impact-rated options. Both PGT and CGI manufacture awning and hopper windows in impact-rated configurations that meet Miami-Dade and Broward County code. If your home is in a wind-borne debris zone, you can keep this window style and still pass code without adding shutters.
Hardware that holds up. We install units with corrosion-resistant crank mechanisms and stainless steel hardware, which matters when you live a few miles from the Atlantic and the breeze carries salt. The cheap hardware we replace on older windows usually fails because it was never designed for a coastal environment.
Repair vs. Replacement: When Awning & Hopper Windows Need Attention
We get a lot of calls about awning windows that won’t stay open, cranks that spin without moving the sash, and hopper windows that have fogged up between the panes. Some of these are repairable. Many aren’t worth repairing.
Here’s a good rule of thumb from what we see across Fort Lauderdale: if the frame is solid and the only problem is a worn crank operator or a broken handle, repair makes sense. Expect $125 to $275 for a crank or hardware replacement. If the glass is cracked but the frame is fine, glass replacement runs $150 to $400 depending on whether it’s standard tempered or impact laminate.
But if the frame is rotting, the sash is warped, or the window is more than 25 years old and the seals have failed, replacement is usually the more economical choice within a few years. A failing seal means the insulating gas between panes has leaked out, and you’re now paying to cool air that leaks through the window itself.
Every repair we do carries a written guarantee. If the repair fails, the second visit is free. We don’t ask you to trust us on that; it’s in writing before we start.
FAQs – Awning & Hopper Windows
How much does it cost to install awning windows in Fort Lauderdale?
Standard awning window installation in Fort Lauderdale runs $420 to $850 per window for most residential jobs, with impact-rated glass from PGT or CGI at the higher end of that range. Hopper windows are smaller and usually cost $300 to $600 installed. Your exact price depends on opening size, frame condition, and whether impact glass is required for your location. Call (754) 354-3671 for a written estimate; it’s free and the number won’t change after you see it.
Can you install awning and hopper windows the same day?
Yes, most single awning or hopper window replacements are completed the same day, including haul-away of the old window. If the opening needs frame repair, that can add time, but we’ll tell you before work starts.
Are impact-rated awning windows available for Fort Lauderdale code requirements?
Yes, both PGT and CGI make impact-rated awning windows that meet Broward County and Miami-Dade code for wind-borne debris zones. We install both brands and will tell you whether your specific property requires impact glass based on its location and building code.
What’s the difference between an awning window and a casement window?
An awning window hinges at the top and opens outward from the bottom, while a casement window hinges at the side and opens outward like a door. Awning windows tend to be wider than they are tall, casement windows taller than they are wide. For Fort Lauderdale’s rain patterns, awning windows offer better ventilation during storms because the sash shields the opening.
Do you repair existing awning and hopper windows, or only replace them?
We do both. Hardware replacement like cranks and handles often makes sense, and we give every repair a written guarantee. If the repair fails, the second visit is free. If the frame or seal is beyond saving, we’ll recommend replacement and give you a written price before you decide.
Call Hale Windows Fort Lauderdale for Your Awning & Hopper Window Estimate
Replacing windows in a Fort Lauderdale home is a decision you shouldn’t have to make twice. That’s why we put the price in writing before any work starts, send you the name and photo of your technician before the truck arrives, and stand behind every job with the 365-Day Done Right Promise. If it’s not right, we make it right. That’s the whole agreement.
Call us at (754) 354-3671 to schedule a free estimate for awning or hopper windows. We’re here 24 hours a day, 7 days a week, and a live person answers. We also invite you to visit our home page to learn more about how Hale Windows Fort Lauderdale approaches every job, and our Window Installation in Fort Lauderdale page covers the full range of styles we install, from single-hung to casement to picture windows.
Written by Spencer Odell, Owner at Hale Windows Fort Lauderdale, serving Fort Lauderdale.
Six Reasons Homeowners Choose Hale Windows Fort Lauderdale
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.