Mr-Glass Window Replacement Nationwide

Mr-Glass Window Replacement: The Fort Lauderdale Owner’s Guide

Mr-Glass window replacement in Fort Lauderdale typically runs $340 – $890 per window installed, depending on glass package, frame size, and whether the sash or the sealed unit needs replacing. We stock Mr-Glass-compatible insulated glass units (IGUs) and hardware at our Fort Lauderdale shop, and most replacements are finished same-day once we’ve confirmed the measurements. The usual discovery is quiet: you notice condensation trapped between the panes, a window that no longer closes square, or a crack that started at the edge and crept across the glass over a few humid South Florida months.

Call (754) 354-3671

Mr-Glass builds windows around extruded aluminum frames and impact-rated glass packages common in Broward County condos and newer single-family homes. The glass unit itself is the part that fails most often, usually because the seal around the IGU gives out and lets moisture in, or because a tropical storm sends a branch through the outer pane. We replace both scenarios weekly across Fort Lauderdale, from Victoria Park high-rises to Imperial Point ranch homes.

Which Mr-Glass Models This Applies To

Mr-Glass manufactures aluminum and vinyl window lines, and the replacement path differs by model. The most common units we service in Fort Lauderdale are Mr-Glass single-hung and horizontal roller windows, fixed picture windows, and casement windows with crank hardware. Each uses a specific glazing bead profile and glass thickness, so getting the wrong replacement means a unit that sits loose or won’t seal against driving rain.

Here’s the compatibility gotcha we see often: Mr-Glass impact units use laminated glass bonded with a specific interlayer, and you cannot swap in a standard annealed IGU and expect the same performance. The replacement must match the original glass make-up: single-pane, double-pane low-E, or impact-laminated. If you’re not sure what you have, check the corner of the glass or the frame sticker for a manufacturing code, or measure the visible glass area to the nearest 1/16 inch. Better: call us and we’ll identify it on site.

On the OEM versus aftermarket question: Mr-Glass-branded replacement glass is not always available for older discontinued series, but quality aftermarket IGUs built to the same thickness, tint, and low-E spec perform equivalently and cost 20 – 35% less. We also service PGT, CGI, and CWS windows, so if your Mr-Glass frame is too far gone to reglaze and a full replacement makes more sense, we can quote you across those lines instead of pushing one brand.

Signs Your Mr-Glass Window Replacement Is Failing

• Condensation between the panes. This is the classic dead-seal sign. The desiccant inside the spacer has saturated, moisture has entered the air space, and no amount of wiping will clear it. The glass unit needs replacement, not the whole window frame.
• Drafts around the sash edges. Over time, the weatherstripping and pile seals on Mr-Glass sliders compress and lose their spring. You feel air moving even when the window is latched. Sometimes a seal replacement fixes it; if the sash itself has warped, the sash gets rebuilt.
• A crack that started at the frame edge. Aluminum frames expand and contract hard under Fort Lauderdale sun. If the glazing bead was over-tightened or the glass sits slightly out of square, thermal stress finds the weak point and cracks propagate from the perimeter.
• The window drops or won’t stay open. On single-hung Mr-Glass units, the spiral balance or block-and-tackle mechanism wears out. The glass is fine, but the operating hardware has failed and the sash becomes dangerous to leave open.
• Fogging that comes and goes with the weather. Morning fog that disappears by noon is still a seal failure, just slower. The IGU is breathing through a pinhole gap. It will get worse, and the glass eventually needs replacement before mold takes hold in the frame track.

Replacement Cost & What’s Included

Here’s what Mr-Glass window replacement in Fort Lauderdale costs, installed, based on the jobs we price weekly:

• Single-pane glass replacement: $180 – $310 per window
• Double-pane IGU without low-E: $340 – $520 per window
• Double-pane IGU with low-E coating: $420 – $610 per window
• Impact-laminated glass replacement: $580 – $890 per window
• Full sash rebuild with glass: $450 – $750 per window

Every quote includes the glass, new glazing seal, labor, and disposal of the old unit. You get a written price before any work starts, and that price does not move once we begin. Our workmanship warranty on Mr-Glass window replacement is ten years on labor, and we back it with the 365-Day Done Right Promise: if the installation isn’t right, we make it right, no argument needed. Independent service provider, by the way – we’re not affiliated with Mr-Glass corporate, so we have no incentive to upsell you into a brand you don’t need.

DIY or Call Us?

You can safely handle the identification: photograph the corner stamp, measure the glass, note whether it’s single or double pane. You cannot safely cut, shim, and seal a replacement IGU into an aluminum Mr-Glass frame without the right glazing tools and a clean flat surface. Impact glass is heavy, laminated, and unforgiving when it decides to shift mid-install. We’ve rebuilt frames where a homeowner’s silicone bead failed three weeks later because the glass sat proud of the frame channel by a sixteenth of an inch.

If the sash balances or crank hardware are the issue, the springs and cables in a Mr-Glass single-hung are under real tension, and a slip means a dropped sash or a cut hand. Call (754) 354-3671 and we’ll send a photo-badged technician with the part on the truck. You’ll know who’s coming before the doorbell rings.

FAQs