New windows and doors improve comfort, cut energy bills and add long-term value to your home. Hale Windows Fort Lauderdale pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
CWS Impact Garage Doors: The Fort Lauderdale Owner’s Guide
We stock and install CWS-compatible impact garage doors throughout Fort Lauderdale, with most complete door replacements running between $2,800 and $6,500 installed depending on size, track configuration, and opener integration. Most owners call us after a storm season inspection reveals a warped panel, a binding track, or a spring that’s been fighting salt air for one year too many. You notice it first in the noise: a grinding, popping, or the door sitting slightly crooked in the opening. We’ll match your CWS door to the right replacement part and have a written price in your hands before any work starts.
Which CWS Models This Applies To
CWS impact garage doors in Fort Lauderdale fall into a few distinct lines, and the part you need depends on which one you have. The CWS 7600 series is the heavy single and double panel impact door we see most often on older Broward County homes, while the 7700 and 7800 series are the later reinforced models with heavier gauge tracks and thicker panel skins. The fastest way to identify your door is to check the label on the inside edge of the top panel or the vertical track: CWS stamps the series number there along with the Miami-Dade NOA (Notice of Acceptance) number. If the label is faded or missing, measure the panel thickness. The 7600 runs 1-3/4 inches thick; the 7700 and 7800 come in at 2 inches.
One compatibility gotcha worth knowing: CWS track brackets and roller stems are not interchangeable across series. We’ve seen owners buy a generic track kit from a supply house, only to discover the roller spacing is off by a quarter inch and the door binds on the second cycle. For CWS specifically, we recommend OEM parts for hinges, rollers, and end caps. Aftermarket equivalents are fine for torsion springs and cables when they’re matched by wire gauge and coil count, but the door’s impact rating depends on the engineering staying intact. We keep both OEM CWS components and quality aftermarket equivalents on our trucks, and we’ll tell you which one makes sense for your door and your budget. In Fort Lauderdale, where a wind-driven 2×4 at 50 mph is a real design condition, that rating matters.
Signs Your CWS Impact Garage Doors Is Failing
- Popping or grinding when the door moves. This usually means a roller bearing has gone flat or a hinge pin is seized from salt corrosion. Fort Lauderdale’s coastal air accelerates this on unprotected steel hardware. The door may still operate, but every cycle is wearing the track.
- Door sits crooked in the opening or pauses mid-travel. That’s a torsion spring losing tension or a cable starting to fray. The door’s weight shifts to one side, which puts stress on the panel joints and the opener carriage. Left alone, this becomes a full spring failure, usually at the worst possible moment.
- Visible rust bleeding through the panel seams. Impact doors have internal steel reinforcement, and when the panel skin is punctured or the paint is worn off the joint, Brackish moisture gets inside. You’ll see rust-colored streaks below the panel seams. The panel can still hold up structurally for a while, but the impact rating is compromised.
- Daylight visible at the top or bottom of the door when closed. This points to failing weatherstripping or a door that’s out of square. In Fort Lauderdale, that gap is an open invitation for wind-driven rain and the humidity that warps everything inside the garage within a few months.
- Opener struggling or reversing for no reason. The opener’s force settings are calibrated to a balanced door. When a spring weakens or a panel absorbs moisture and gains weight, the opener works harder. You’ll hear the motor laboring, and eventually the safety reverse will start tripping. The opener isn’t the problem; the door’s weight and balance are.
Replacement Cost & What’s Included
For a complete CWS impact garage door replacement in Fort Lauderdale, plan on $2,800 to $4,200 for a single door up to 9 feet wide, and $4,500 to $6,500 for a double door up to 18 feet. That includes removal and disposal of the old door, new track, springs, cables, hinges, weatherstripping, and a basic wall button. If you’re adding a new opener or upgrading to a quieter belt-drive unit, expect another $450 to $900 depending on the motor’s horsepower and rail type. Repair work is less: spring and cable work typically runs $250 to $500, and a single panel replacement starts around $600 plus materials.
What drives the range for Fort Lauderdale specifically is the wind-load requirement for your zone. Homes east of Federal Highway that are closer to direct storm exposure may require a heavier door with a higher pressure rating, and that adds to panel cost. We write the price down before we touch anything, and the quote is the quote. If the door size is standard and the opening is square, there are no change orders after the fact. Every repair we do carries a written guarantee, and if it fails, the second visit is free. Our 365-Day Done Right Promise covers the entire job: if it isn’t right, we make it right.
DIY or Call Us?
There’s a line between what’s safe to check and what’s dangerous to fix, and torsion springs sit firmly on the dangerous side. A CWS impact garage door can weigh 300 to 500 pounds, and the torsion spring above your head is holding that weight under tension. When a spring lets go, it releases that energy instantly. We don’t give step-by-step instructions for spring, cable, or track work because getting it wrong can cause serious injury. Even experienced builders we know won’t touch garage door springs without the right winding bars.
What you can safely do: visually inspect the rollers, hinges, and cables for rust, fraying, or wear; check that the weatherstripping is seated; test the balance by disconnecting the opener and lifting the door halfway (it should stay put, not drop or rise). If anything looks off, call us at (754) 354-3671. We’ll schedule a time, and you’ll know exactly who’s coming to the door before they arrive. That’s how we’ve done it since I joined this crew, and it’s not changing.
FAQs
A CWS impact garage door in Fort Lauderdale typically lasts 15 to 20 years, but coastal salt air can shorten that to 10 to 12 years if the hardware isn’t maintained and the panel finish isn’t touched up. Springs wear faster than panels, usually 8 to 10 years, and we replace them as a set so the door stays balanced. Call (754) 354-3671 and we’ll give you an honest read on what’s still got life in it and what doesn’t.
Yes, in many cases a single panel can be replaced rather than the whole door, as long as the rest of the panels and track are in good shape. The catch is that older CWS panel stock can be discontinued, especially on the 7600 series, and if we can’t source an exact match, a full door replacement is the only way to keep the impact rating intact. We’ll tell you straight which route makes sense after we see the door. Estimates are free; call (754) 354-3671.
Most single door replacements take one day, and larger double doors with new openers can run into a second morning. We schedule the job with a written timeline before we start, so you know what to expect. Call (754) 354-3671 and we’ll give you a specific window for your project.
We stock the common CWS 7600, 7700, and 7800 series parts on our trucks, including torsion springs, cables, rollers, hinges, and end caps. We also keep parts for PGT, CGI, and ES Windows impact products, which is useful if your home has mixed-brand openings. If your part isn’t on the truck, we can usually have it within a few days through our local supply lines. Call (754) 354-3671 and we’ll check for your exact model before we come out.
Written by Spencer Odell, Owner, Hale Windows Fort Lauderdale at Hale Windows Fort Lauderdale, serving Fort Lauderdale and nearby areas.
Six Reasons Homeowners Choose Hale Windows Fort Lauderdale
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.