New windows and doors improve comfort, cut energy bills and add long-term value to your home. Hale Windows Fort Lauderdale pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
CWS Windows & Doors in Plantation, FL | Hale Windows Fort Lauderdale
We provide independent CWS windows and doors service across Plantation, from Window Repair - Plantation for single-hung issues to full impact-rated replacements. Our crews have worked CWS equipment in this city long enough to know that a “leaking” slider in East Plantation is often just a clogged weep hole, not a failed door. Call (754) 354-3671 for a free estimate on any CWS window or door in Plantation, and we’ll tell you honestly whether it’s a repair or a replacement.
We’re not a CWS dealer and we’re not manufacturer-affiliated. That matters because we have no reason to push a new unit when a $40 roller swap fixes the problem. Spencer Odell, our owner, started measuring and installing windows across Broward County nearly two decades ago. He’s seen which CWS models fail, where they fail, and what Plantation’s climate does to them. We carry genuine CWS parts for structural and safety work, and quality aftermarket components for routine wear items. That’s the independent difference.
Why Plantation Residents Choose Us for CWS Service
Most window companies in Plantation will sell you a replacement before they look at the old one. We take the opposite approach. If a CWS 8200 horizontal roller is binding because the track is packed with sand from your patio, we’ll tell you that. If a 6500 single hung is dropping because the spring balance finally gave out after thirty years of afternoon sun, we’ll quote that repair. You get a written price before any work starts, every time.
Spencer grew up in the San Fernando Valley and learned window and door fundamentals at Los Angeles Trade-Technical College before relocating to Florida. Since then, he’s worked everything from mid-century ranch homes in Colee Hammock to newer construction along the waterfront. His crews get rough openings right, and they don’t patch over mistakes with caulk. That background is why we take CWS repair seriously here in Plantation, where much of the housing stock still runs original 1960s and 1970s aluminum frames that most installers won’t touch.
We’re independently owned and operated, part of the Threshold Group family of home-service brands. Every technician who comes to your door is background-checked, identity-verified, photo-badged, and pre-announced by name and photo before the visit. So when we say we’re sending someone to your Plantation home, you know exactly who’s showing up.
Common CWS Windows & Doors Problems We Solve in Plantation
- CWS 6500 Single Hung: dropped sashes and spring balance failure. Plantation’s daily UV and heat cycling wears the spring balances and sash channels faster than inland areas. The sash starts dropping, then won’t stay up at all. We replace the balance assemblies and recondition the channels so the window holds position.
- CWS 8200 Horizontal Roller: clogged weep holes and corroded rollers. Sand, mulch, and afternoon downpours are a bad combination for these sliders. When weep holes clog, water pools in the track, rollers rust, and the door grinds instead of gliding. We clear the weep paths, swap in rollers rated for salt air, and reset the track slope.
- CWS 4540 3-Lite Sliding Glass Door: wind-driven rain under the door. The interlock weatherstripping and track seals on these doors wear out, especially on Plantation homes where the slider faces a patio or pool. After a strong thunderstorm, water blows under the track. New interlock seals and a track reseal fix it.
- Large fixed CWS picture windows: heat-warped vinyl and seal failure. West-facing picture windows in Plantation absorb intense afternoon sun, which warps vinyl frames and breaks the seal between panes. That’s the fog you can’t wipe off. On older units, we’ll tell you straight if a full-frame replacement makes more sense than a glass swap.
- Original aluminum CWS sliders: air leaks and binding tracks. 1960s aluminum frames have no thermal break and no impact rating. They bind, they leak air, and they don’t meet current Broward County code. We repair what’s worth repairing and give you honest replacement numbers when the frame is done.
CWS Service in Plantation: What Local Conditions Mean for Your Equipment
In East Plantation, dozens of 1960s-era CWS sliders still have their original weep holes, and those weep holes clog with decades of sand and mulch. That’s the thing most people miss. A homeowner calls us about a “leaking door” after an afternoon thunderstorm, and the door itself is fine. The water has nowhere to drain because the weep paths are blocked, so it backs up and blows under the track into the family room. Clearing the weep channels, rebalancing the rollers, and correcting the track slope often fixes the problem completely. No new door needed. That’s a fix that only makes sense if you know East Plantation’s housing stock and soil conditions, not just CWS’s product line.
We saw this exact scenario last spring at a Plantation Acres ranch off NW 5th St. A CWS 8200 horizontal roller had soaked the family room carpet after every storm for months. The weep holes were packed with years of mulch, and the stainless rollers had rusted to the track. We cleared the channels, installed new aftermarket rollers rated for salt air, and reset the track slope. The door hasn’t leaked since, and it glides better than it has in years.
CWS Models & Products We Service in Plantation
We service the full range of CWS product families you’ll find in Plantation homes, including the 6500 Series Single Hung, the 8200 Series Horizontal Roller, the 4540 Series 3-Lite Sliding Glass Door, and the 9500 Series Casement. When structural integrity, safety, or impact rating is on the line, we use genuine CWS parts like laminated glass and multi-point locks. For routine wear items like balances, rollers, and weatherstripping, we use quality aftermarket components that hold up under Broward County conditions. We stock the common parts locally so Plantation service calls don’t wait on shipping from a distributor across the state.
We also install and service impact-resistant windows, hurricane impact windows, and French and double doors. We match the right product to your home’s exposure, not the other way around. If a Plantation Window Replacement beats another repair on a pre-2000 CWS unit that no longer meets current impact codes, we’ll say so plainly.
CWS Service Pricing in Plantation
CWS window and door repairs in Plantation typically run $180 to $650 depending on the failure and the parts involved. A spring balance replacement on a 6500 single hung might land around $185 to $280. A roller swap and track service on an 8200 slider usually runs $220 to $380. Resealing a 4540 sliding glass door and replacing worn interlock weatherstripping can run $300 to $550. Full impact-rated CWS replacements start higher and depend on size, glass package, and installation complexity.
What drives the cost is the part itself, the labor to access it, and whether the repair needs to meet current Florida Building Code. A free estimate from us includes a written line-item price before any work begins, so you know exactly what you’re paying. Call (754) 354-3671 and we’ll walk you through what your specific CWS unit needs.
Serving Plantation, FL - Our Local Coverage Area
We’re based in the Plantation area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – CWS Windows & Doors in Plantation
Retrofitting original 1960s or 1970s aluminum frames with impact glass is possible in some cases, but it depends on the frame condition and whether the unit can accept laminated glass and upgraded hardware to meet Broward County code. Many of the original frames in Plantation’s older neighborhoods are too corroded or too narrow for a proper retrofit, which means full-frame replacement is the smarter long-term option. We’ll measure and tell you honestly which route makes sense. Call (754) 354-3671 for an assessment.
Nine times out of ten in East Plantation, it’s clogged weep holes. The door is fine. Water collects in the track because the weep paths are packed with sand and mulch, then wind-driven rain pushes it under the door. Clearing the weep channels, servicing the rollers, and checking the track slope usually solves it. If the interlock weatherstripping is shot, we’ll replace that too. Call (754) 354-3671 and we’ll diagnose it on site.
Yes. Impact-rated CWS windows and doors still have moving parts, weep holes, and weatherstripping that wear out under Plantation’s sun, humidity, and storm cycles. A yearly check of the balances, rollers, seals, and weep paths catches small problems before they become water intrusion or hardware failure. Most of our Plantation customers schedule it in the spring, before hurricane season. Call (754) 354-3671 and we’ll put you on the schedule.
That haze is seal failure. The insulated glass unit has lost its seal, moisture has gotten between the panes, and the desiccant inside the spacer is saturated. In Plantation’s humidity, this happens faster than in drier climates. The fix is replacing the glass unit, not the whole window. On larger fixed CWS picture windows with warped vinyl frames, we’ll tell you if the frame needs to go too. Call (754) 354-3671 for exact pricing on your glass size.
If the frame is straight and the only problems are hardware and seals, a repair makes sense. But original 1960s aluminum sliders have no thermal break, no impact rating, and no compatibility with current code. If the frame is corroded, pitted, or out of square, you’re paying good money to keep a unit that will fight you again next year. We’ll give you both numbers, repair and replacement, and let you decide. Call (754) 354-3671 for a free estimate.
Service Areas Near Plantation
Beyond Plantation, we provide CWS windows and doors service in CWS service in Fort Lauderdale, CWS service in Pompano Beach, and the surrounding neighborhoods including Lauderhill and Lauderdale Lakes. If you’re in Plantation and need CWS sales & service or are checking whether your address falls in our Plantation service area, call us and we’ll confirm right away.
Book Your CWS Service in Plantation Today
If your CWS window or door is binding, leaking, fogging, or failing, call (754) 354-3671. We’ll send a technician who is background-checked, photo-badged, and pre-announced by name before they arrive. You’ll get a written price before any work begins, and every repair carries a written guarantee. If the repair fails, the second visit is free. If I wouldn’t put it on my own house, I won’t sell it to yours.
Written by Spencer Odell, Owner at Hale Windows Fort Lauderdale, serving Plantation and Broward County since 2009.
Six Reasons Homeowners Choose Hale Windows Fort Lauderdale
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.